B-I-N® Advanced synthetic shellac primer is a synthetic shellac-based primer sealer that provides excellent stain blocking for whole-surface interior priming and exterior spot priming. |
It combines fast dry time, low-odor, excellent hide and stain blocking for new construction, remodeling and fire and water restoration. |
Excellent stain blocker · Low odor; soap and water clean up |
Seals tannin, knots and sap streaks |
Seals cigar, cigarette & nicotine odors |
Seals severe water stains, fire & smoke damage |
Seals rust stains, graffiti, crayon, lipstick and grease |
Adheres to slick surfaces like tile, glossy paints and varnishes |
Type | Water-Based |
---|---|
Color | White |
Size | Quart |
Brand | Zinsser |
Color Family | White |
Finish | Flat |
Paint Sheen | Flat |
Material | Water-Based |
Manufacturer Code | 271009 |
Apply only when air, material, and surface temperatures are between 50-90ºF (10-32ºC) and the relative humidity is less than 85%. |
Thoroughly mix or shake to ensure any settled pigment is re-dispersed before using. |
If thinning is required, add no more than 10 ounces of water per gallon. |
In most cases only one coat is necessary to prime most surfaces. |
If excessive absorption occurs over very porous substrates a second coat may be necessary. |
For best results, prime entire surface before painting. |
Apply with a high quality brush, 3/8” nap roller, or airless sprayer. Follow manufacturer's instructions when using spray equipment. |
Airless spraying - use a 0.015-0.017" tip at 1700-2200 psi. Provide adequate ventilation at all times. |
DRY & RECOAT TIMES Dry and recoat times are based on 70°F and 50% relative humidity. Allow more time at cooler temperatures. |
Dries to the touch in 25 minutes and can be recoated in 45 minutes. It is fully cured in 7 days. For knots and stain blocking, allow 2 hours to dry. When sealing water stains, some stain may appear in the primer film as it dries. The stain is locked and will not bleed into the topcoat. |